Clarion CD Player DXZ675USB User Manual

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to consult the dealer or an

experienced radio/TV technician for help.

Owner’s manual

Mode d’emploi

Manual de instrucciones

Cet appareil a été testé et jugé conforme aux limites des appareils numériques de Classe B, aux

termes de la Section 15 des Règlements FCC.

Ces limites ont pour but d’assurer une protection raisonnable contre les interférences parasites

dans une installation résidentielle.

Cet appareil engendre, utilise et peut émettre une énergie radioélectrique et, s’il n’est pas installé

et utilisé en stricte conformité avec ces instructions, il peut provoquer des interférences parasites

sur les liaisons radiophoniques. Ceci ne garantit par pour autant qu’une installation particulière ne

provoquera aucune interférence.

Si l’appareil engendre des interférences sur la réception des ondes radio ou de télévision, ce qui

peut être vérifié en mettant l’appareil hors tension puis sous tension, l’utilisateur est invité à

consulter son revendeur ou un technicien exprimenté en radio/télévision pour lui demander conseil.

DXZ675USB

Este equipo ha sido probado y se ha comprobado que cumple con los límites de un dispositivo

digital de clase B, según lo indicado en la Parte 15 de las Normas de FCC.

Estos límites se han establecido para ofrecer una protección razonable contra interferencias

perjudiciales en instalaciones residenciales.

Este equipo genera, emplea, y puede radiar energía de radiofrecuencia y, si no se instala y emplea

de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las

radiocomunicaciones. Sin embargo, no se garantiza que las interferencias no ocurran en una

instalación en particular.

Si este equipo causa interferencias perjudiciales en la recepción de radio o de televisión, lo cual

podrá determinarse conectando y desconectando la alimentación del equipo, se aconseja al

usuario que consulte al abastecedor o que pida ayuda a un técnico en radio/televisión

experimentado.

CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL

AUTORADIO CD/USB/MP3/WMA / AVEC COMMANDE CeNET

RECEPTOR DE CD/USB/MP3/WMA/AAC CON CONTROL CeNET

Bottom View of Source Unit

Fond de l’appareil pilote

Vista inferior de la unidad fuente

Be sure to unfold and read the next page.

Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

DXZ675USB

CLARION PRODUCT REGISTRATION INFORMATION

CONTROLS / LES COMMANDES / CONTROLES

For USA and Canada only

www.clarion.com

Source unit / Appareil pilote / Unidad fuente

Dear Customer:

[

]

[

Congratulations on your purchase of a Clarion mobile electronic products. We are

confident that you’ll enjoy your Clarion experience.

[

]

OPTION

]

ENT

There are many benefits to registering your product. We invite you to visit our website at

[

]

SRC

[

]

SEEK PANEL

www.clarion.com to register your Clarion product.

[

]

RELEASE

We have made product registration simple with our easy to use website. The registration

form is short and easy to complete. Once you’re registered, we can keep you informed of

important product information.

[

]

VOL

[

]

P.CH

INFORMATIONS DE L’ENREGISTREMENT DE PRODUITS CLARION

Pour les Étas Unis et le Canada seulement

www.clarion.com

Cher client:

[

] (SOUND)

] (EJECT)

] (MUTE)

Nous vous remercions d’avoir acheté ce produit électronique mobile Clarion. Nous

sommes confiants que vous apprécierez votre expérience Clarion.

[

]

ISR

[

Il y a beaucoup d’avantage à enregistrer votre produits. Nous vous invitons à visiter notre

site Web www.clarion.com pour enregistrer votre produit Clarion.

[

]

IR RECEIVER

[

]

TITLE

Nous avons facilité la tache d’enregistrement de produit simple et facile grâce à notre

site Web. Le formulaire d’enregistrement est court et facile à compléter. Lorsque vous

êtes enregistrer, nous pouvons vous tenir informé des informations important de produits.

With the MOTORIZED FACE opened/ Ouvrez la FACE MOTORISÉE

Apertura del FRONTAL MOTORIZADO

Enregistrer à www.clarion.com - c’est facile de mettre à jour votre produit Clarion.

[CD SLOT]

INFORMACIÓN DEL REGISTRO DE PRODUCTO DE CLARION

Para USA y Canada nomas

www.clarion.com

Querido Cliente:

Felicitaciones por su compra de producto electrónico móvil de Clarion. Estamos seguros

que usted gozará de su experiencia con el producto de Clarion.

Hay muchas ventajas al registrar su producto. Le invitamos a que visite nuestro sitio en

internet www.clarion.com para registrar su producto de Clarion.

Hemos hecho el registro de producto fácil en nuestro sitio. La forma de registro es corta

y fácil de completar. Una vez que lo registre, podremos proporcionarle la información de

su producto.

Registrese en www.clarion.com - es fácil mantener su producto de Clarion actualizado.

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

DXZ675USB

_{Download from Www.Somanuals.com. All}i_Mii_{anuals Search And Download.}

DXZ675USB

Thank you for purchasing this Clarion product.

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

∗ This manual includes the operating procedures of the iPod interface, CD/DVD changer, Satellite

Radio Receiver and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer

and TV tuner have their own manuals, but no explanations for operating them are described.

“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Contents

CONTROLS............................................................................................................................................ ii

1. FEATURES...................................................................................................................................... 1

2. PRECAUTIONS ............................................................................................................................... 2

Motorized Face................................................................................................................................. 2

Handling Compact Discs.................................................................................................................. 3

3. NOMENCLATURE........................................................................................................................... 4

Names of the Buttons and Their Functions...................................................................................... 4

Display Items.................................................................................................................................... 5

LCD Screen...................................................................................................................................... 5

4. DCP.................................................................................................................................................. 6

5. REMOTE CONTROL ....................................................................................................................... 7

Inserting the Battery ......................................................................................................................... 7

Functions of Remote Control Unit Buttons....................................................................................... 8

6. OPERATIONS................................................................................................................................ 10

Basic Operations............................................................................................................................ 10

Radio Operations ........................................................................................................................... 14

CD/MP3/WMA/AAC Operations..................................................................................................... 16

Operations Common to Each Mode............................................................................................... 20

7. OPERATIONS OF ACCESSORIES .............................................................................................. 24

USB Operations ............................................................................................................................. 24

iPod BB Operations........................................................................................................................ 26

Satellite Radio Operations.............................................................................................................. 28

CD Changer Operations................................................................................................................. 30

DVD Changer Operations .............................................................................................................. 31

TV Operations ................................................................................................................................ 32

8. IN CASE OF DIFFICULTY............................................................................................................. 33

9. ERROR DISPLAYS ....................................................................................................................... 35

10. SPECIFICATIONS ......................................................................................................................... 36

1. FEATURES

• Motorized Full Dot LCD with SLIDETRAK

• 6ch/6V RCA Output / 53W X 4 Built-in MOSFET Amplifier

• Built-in LPF/HPF

DXZ675USB

2. PRECAUTIONS

1. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN, MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

If moisture forms on the optical parts of the

player, do not use the player for about one

hour. The condensation will disappear

naturally allowing normal operation.

THE COMPACT DISC PLAYER SHOULD NOT

BE ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE

PERSONNEL.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

CHANGES OR MODIFICATIONS NOT

EXPRESSLY APPROVED BY THE

MANUFACTURER FOR COMPLIANCE

COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open

the case, disassemble the unit, or lubricate

the rotating parts.

INFORMATION FOR USERS:

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY AND WILL VIOLATE FCC

APPROVAL.

Motorized Face

This unit uses motorized face to make large-screen displays possible.

When you use the motorized face, be sure to close it.

3. If you move the MOTORIZED FACE by

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE MOTORIZED FACE.

hand, this may create play. To correct this

play, with the power on for the unit, press the

[Q] button to close the MOTORIZED FACE.

4. After a disc is ejected, the MOTORIZED

FACE automatically returns to the tilted or

closed state. If there is any obstruction when

the MOTORIZED FACE tries to close, the

safety mechanism is triggered and the

MOTORIZED FACE returns to the open

state. If this happens, remove the

1. For safety’s sake, always close the

MOTORIZED FACE before leaving this unit

unused for a prolonged period or switching

OFF the ignition key.

If you switch OFF the ignition key with the

MOTORIZED FACE tilted, the MOTORIZED

FACE does not close.

obstruction, then press the [Q] button.

5. To avoid scratching the compact disk, keep

the CD level when inserting or removing

them.

2. Before the MOTORIZED FACE closes, there

may be a braking sound from the safety

mechanism. This is normal.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Handling Compact Discs

Use only compact discs bearing the

Storage

• Do not expose compact discs to direct

sunlight or any heat source.

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

• Do not expose compact discs to excess

humidity or dust.

Some CDs recorded in CD-R/CD-RW mode

may not be usable.

• Do not expose compact discs to direct heat

from heaters.

Handling

Cleaning

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

Therefore, do not leave them for a long time

in the car.

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the

center of the compact disc to the

circumference.

• Do not use any solvents, such as

commercially available cleaners, anti-static

spray, or thinner to clean compact discs.

• New discs may

Ball-point pen

have some

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

roughness

Roughness

around the

edges. If such

discs are used,

the player may

not work or the

sound may skip. Use a ball-point pen or the

like to remove any roughness from the edge

of the disc.

• Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with

peeling off marks. If you try to play such a

compact disc, you may not be able to get it

back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc

or cause breakdown of the internal

mechanism.

DXZ675USB

3. NOMENCLATURE

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Names of the Buttons and Their Functions

[RELEASE] button

• Deeply push in the button to unlock the DCP.

[P.CH] button

• Push the button upward or downward to recall

the stored station while in the radio mode.

[SRC] button

• Press the button to turn on the power.

• Select the folder while in the MP3/WMA/AAC

mode.

• Press and hold the button for 1 second or

longer to turn off the power.

• Perform various settings.

[

] (SOUND) button

• Switch the operation mode among the radio

mode, etc.

• Press the button to enter the sound mode.

• Press and hold the button for 1 second or

longer to turn on or off the MAGNA BASS

EXTEND mode.

[OPTION] button

• Press the button to enter the option mode.

• Press and hold the button for 1 second or

longer to enter the adjust mode.

[ISR] button

• Recall ISR radio station in memory.

[SEEK PANEL]

• Press and hold the button for 2 seconds or

longer: Store current station into ISR memory

(radio mode only).

• The [SEEK PANEL] allows the controls on

the ends to be moved to right or left to permit

station tuning (radio), track selection (CD),

and to perform various settings in the

adjustment mode.

[IR RECEIVER]

• Receiver for remote control unit. (Operating

range: 30° in all directions)

[TITLE] button

• Use the button to switch the user titles or

track titles, etc. while in the CD/MP3/WMA/

AAC mode.

• Press and hold the button to switch the

display indication (Action display, Title display

and Clock time display).

[MENU] button

• Switch the band, or seek tuning or manual

tuning while in the radio mode.

[

] (MUTE) button

• Turn mute on or off.

• Press the button to enter the list search mode

while in the CD/MP3/WMA/AAC mode.

[Q] (EJECT) button

• Press to open the MOTORIZED FACE and

insert a CD into the CD SLOT.

• Press and hold the button for 1 second or

longer to play the first track while in the CD/

MP3/WMA/AAC mode.

• Press to eject a CD loaded in the unit.

[VOL] button

• Push the button upward or downward to

adjust the volume.

• Press the button to change the character.

[

] button

• Play or pause a track while in the CD/MP3/

[CD SLOT]

• CD insertion slot.

WMA/AAC mode.

• Confirm various settings.

• Press the button to enter the preset memory

mode (radio).

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Display Items

Source indication

•

FM1-3, AM : Radio mode

SR1-3

XM1-3

USB

iPod

: Satellite radio mode (SIRIUS)

: Satellite radio mode (XM)

: CD/MP3/WMA/AAC mode

: USB mode

•

Radio mode: Preset No. / frequency

CD mode : Track No. / playback time

MP3/WMA/AAC mode

: Folder No. /track No. / playback time

CD / DVD changer mode

: Disc No. / track No. / playback time

: iPod BB mode

CDC1-4 : CD changer mode

DVDC1-4 : DVD changer mode

•

TV1-2

AUX

TEL

: TV mode

: AUX mode

: Telephone mode

TV mode

: Preset No. / channel

Clock time

indication

Operation status indication

Titles indication

Source icon

(3 patterns)

: Disc/Folder random

: Disc/Folder repeat

: Disc/Folder scan

: Track random

: Track repeat

: Track/Preset/Service scan

: Auto store

A.RDM

A.RPT

A.SCN

RDM

RPT

SCN

WMA

MANU

: MP3/WMA/AAC indication

: Manual indication

CAT MODE : Category mode indication

CH MODE : Channel mode indication

SAT

M-B

: Satellite indication

: MAGNA BASS EXTEND

indication

: Digital Z-Enhancer indication)

: Sound restorer indication

: Stereo indication (radio only)

(DZE

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

DXZ675USB

4. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Insert the DCP so that the Asection on the

right side of the DCP catches on the hook B

on the unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. With the MOTORIZED FACE closed, turn off

the power.

2. Press the [RELEASE] button deeply to open

the DCP.

[RELEASE] button

2. Press the left side Cof the DCP carefully to

fit it in place.

3. Pull the DCP toward you and remove it.

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

• If the [RELEASE] button is pressed and

the DCP is not locked into place, it may fall

out from vibration of the car. This can

break the DCP, so after removing it, either

install it on the unit or put it in its DCP

case.

DCP

CAUTION

• Always close the MOTORIZED FACE

before removing the DCP.

• The connector connecting the unit and the

DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

• If you remove the DCP with the

MOTORIZED FACE open, the MOTORIZED

FACE closes immediately. Be careful not

to get your fingers caught.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

5. REMOTE CONTROL

Inserting the Battery

1Turn over the remote control unit and slide

the cover in the direction indicated by the

arrow in the illustration.

2Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing

upwards.

3Press the battery in the direction indicated by

the arrow so that it slides into the

compartment.

4Replace the cover and slide in until it clicks

Insertion guide

into place.

Notes:

Misuse may result in rupture of the battery,

producing leakage of fluid and resulting in personal

injury or damage to surrounding materials. Always

follow these safety precautions:

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/– polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire

or water. Do not attempt to disassemble the

battery.

• Dispose of used batteries properly.

DXZ675USB

Functions of Remote Control Unit Buttons

∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main

unit.

Signal transmitter

[

]

[

]

SRC

BND

[

]

[

]

MUTE

DISP

[

ISR

[

]

RDM

]

RPT

[

]

SCN

● Shared modes

● Radio/Satellite Radio modes

[SRC] button

• Press the button to turn on the power.

[BND] button

• Switches reception band.

Press and hold the button for 1 second or

longer to turn off the power.

[x], [v] buttons

• Moves preset channels up and down.

• Use to alternate operation mode among the

various modes.

[SCN] button

• Press to perform preset scan.

[w], [z] buttons

• Press and hold the button for 2 seconds or

longer to perform auto store.

• Increases and decreases volume.

[MUTE] button

• Turns mute function on and off.

• In the Satellite Radio mode, press once to

perform category scan; hold depressed for 1

second or longer to perform preset scan.

[ISR] button

• Recalls ISR radio station stored in memory.

● CD/MP3/WMA/AAC and USB

• Press and hold the button for 2 seconds or

longer to store current station in ISR memory

(radio mode only).

modes

[BND] button

• Press to play the first track.

[DISP] button

[x], [v] buttons

• Press to alternate among action display, title

display and Clock time display, etc.

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Functions of Remote Control Unit Buttons

[

] button

● iPod BB mode

• Switches between playback and pause.

[x], [v] buttons

• Press to move the tracks up and down.

[SCN] button

• Press to perform scan play.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder scan play.

[

] button

• Switches between playback and pause.

[RPT] button

• Press to perform repeat play.

[RPT] button

• Press to perform repeat play.

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder repeat play.

• Press and hold the button for 1 second or

longer to perform all repeat play.

[RDM] button

• Press to perform random play.

[RDM] button

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform all random play.

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder random play.

● TV mode

[BND] button

• Switches reception band.

● CD changer/DVD changer modes

[BND] button

• Press to switch to next disc in ascending

order.

[x], [v] buttons

• Moves preset channels up and down.

[SCN] button

• Press to perform preset scan.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 2 seconds or

longer to perform auto store.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[RDM] button

• Press to alternate between TV and VTR.

[

] button

• Switches between playback and pause.

[SCN] button

• Press to perform scan play.

• Press and hold the button for 1 second or

longer to perform disc scan play.

[RPT] button

• Press to perform repeat play.

• Press and hold the button for 1 second or

longer to perform disc repeat play.

[RDM] button

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform disc random play.

DXZ675USB

6. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Basic Operations

Adjusting the volume

1. Push the [VOL] button upward or downward

CAUTION

Be sure to lower the volume before

to adjust the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

Switching the display

Press and hold the [TITLE] button for 1 second

or longer to select the desired display.

hearing and damage the unit.

● When the power is turned on

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Each time you press and hold the [TITLE]

button for 1 second or longer, the display

switches in the following order:

Action display ➜ Title display ➜ Clock time

display ➜ Action display...

● When the power is turned off

1. Each time you press the [TITLE] button, the

clock time appears or disappears in the

display.

1. Press the [SRC] button.

The mode that was previous active is

displayed.

2. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHECK” appears in the

display, then the unit returns to the clock display

mode. The system check starts within the unit.

When the system check is complete, press the

[SRC] button again.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio ➜ (Satellite radio) ➜ CD/MP3/WMA/

AAC ➜ USB ➜ (iPod BB) ➜ (CD changer) ➜

(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

Adjusting MAGNA BASS EXTEND

Adjusting Sound Mode

The MAGNA BASS EXTEND does not adjust

the low sound area like the normal sound

adjustment function, but emphasizes the deep

bass sound area to provide you with a dynamic

sound.

To change sound mode

1. Press the [ ] button and select the sound

mode to adjust.

1. Press and hold the [ ] button for 1 second

or longer to turn on the MAGNA BASS

EXTEND effect. “M-B” lights in the display.

2. Press and hold the [ ] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect. “M-B” goes off from the

display.

2. Push the [SEEK PANEL] leftward or

rightward to select the “item name”.

“S-W VOLUME” ↔ “DZE” ↔ “BASS” ↔

“TREBLE” ↔ “S RESTORER” ↔ “HPF” ↔

“S-W LPF” ↔ “BALANCE” ↔ “FADER”

∗ The adjustment can only be performed when

the DZE is set to “DZE OFF”.

∗ The factory default setting is off.

3. Push the [P.CH] button upward or

downward to select the “desired setting

value”.

Mute

Use this function to turn off the sound

immediately.

∗ In the case of item names appearing with

the “ENT” suffix after the item name, the

1. Press the [ ] button.

The sound turns off and “MUTE” blinks in the

display.

[

] button must be pressed to display

the setting value.

∗ “BASS” and “TREBLE” can be adjusted

only when “DZE” is set to “DZE OFF” (page

12).

2. Press the [ ] button again to cancel the

mute mode.

∗ After completing settings, press the [

button to return to the previous mode.

]

Note:

• During sound adjustment mode, if no

operation is performed for more than 10

seconds, this mode can be canceled and

return to the previous mode.

● Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s

subwoofer output terminal.

2-1. Select the “S-W VOLUME”.

3-1. Push the [P.CH] button upward or

downward to change the output volume.

∗ The factory default setting is “0”.

(Setting range: +5 to –5)

DXZ675USB

Basic Operations

● Setting the Digital Z-Enhancer

This unit are provided with 3 types of sound

tone effects stored in memory. Select the one

you prefer.

∗ The factory default setting is “DZE OFF”.

2-1. Select the “DZE”.

● Compensation of frequency

characteristics

The figure below shows the relationship

between the center frequency, gain and Q

curve.

Level

(dB)

Q curve(Q)

3-1. Press the [

] button.

Q =

3-2. Push the [SEEK PANEL] leftward or

rightward to select the tone effect. Each

time you push the [SEEK PANEL], the tone

effect changes in the following order:

3dB

Gain

“DZE OFF” ↔ “DZE 1” ↔ “DZE 2” ↔ “DZE

3”

DZE OFF : no sound effect

Frequency

curve

Frequency

(Hz)

DZE 1

DZE 2

: Suitable for genuine speakers

Center

Frequency (F)

: Suitable for separate

speakers

DZE 3

: Suitable for co-axial speakers

● Q curve

The Q curve becomes sharper when the

numerical value is increased, and smoother

when the numerical value is decreased.

3-3. When the “DZE 1”, “DZE 2” or “DZE 3” is

set, push the [P.CH] button upward or

downward to change the DZE level from +3

to –3.

Flat frequency characteristics can be made by

selecting a Q curve opposite to that of the curve

to be compensated.

∗ The factory default setting is “0”.

3-4. Press the [

previous mode.

] button to return to the

● Compensation

There is no need to compensate frequency

characteristics if they are flat (no peaks or

valleys) when you have measured the

frequency characteristics with a measuring

device. However, sometimes the frequency

characteristics rise or fall in some places. If this

happens, the frequency characteristics must be

compensated. Create a frequency curve having

characteristics that are opposite to the center

frequency of parts where the characteristics rise

and fall to cancel out these peaks and values,

and make the frequency characteristics as flat

as possible.

Q curve : 1

Q curve : 20

● Adjusting the bass

The bass gain, bass FREQ (center frequency)

and bass Q can be adjusted as follows.

The adjustment can only be performed when

the DZE is set to “DZE OFF”.

2-1. Select “BASS”.

2-2. Press the [

] button.

Making the frequency characteristics as flat as

possible is called “Compensation”.

2-3. Push the [SEEK PANEL] leftward or

rightward and select from:

“BASS GAIN” ↔ “BASS FREQ” ↔

“BASS Q”

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

3-1. Push the [P.CH] button upward or

downward to adjust the gain, the FREQ

(center frequency) and the Q.

1: For music sources compressed for high

quality at low bit rate

2: For music sources compressed for

BASS GAIN: +7 to –7 (The factory default

setting is “0”)

standard quality at low bit rate

3: For music sources compressed for low

BASS FREQ: 50Hz/80Hz/120Hz (The

factory default setting is “50”)

quality at low bit rate

● Setting high pass filter

2-1. Select “HPF”.

BASS Q: 1/1.25/1.5/2 (The factory default

setting is “1”)

3-1. Push the [P.CH] button upward or

downward to select the setting. Each time

you push the [P.CH] button, the setting

changes in the following order:

3-2. Press the [

previous mode.

] button to return to the

● Adjusting the treble

The treble gain and treble FREQ (center

“THRGH” ↔ “50Hz” ↔ “80Hz” ↔ “120Hz”

frequency) can be adjusted as follows.

∗ The factory default setting is “THRGH”

(through).

The adjustment can only be performed when

the DZE is set to “DZE OFF”.

● Setting low pass filter

2-1. Select “S-W LPF”.

2-1. Select “TREBLE”.

3-1. Push the [P.CH] button upward or

2-2. Press the [

] button.

downward to select the setting.

2-3. Push the [SEEK PANEL] leftward or

rightward and select from:

Each time you push the [P.CH] button, the

setting changes in the following order:

“TREB GAIN” ↔ “TREB FREQ”

“THRGH” ↔ “50Hz” ↔ “80Hz” ↔ “120Hz”

∗ The factory default setting is “THRGH”

(through).

3-1. Push the [P.CH] button upward or

downward to adjust the gain and FREQ

(center frequency).

TREB GAIN: +6 to –6 (The factory default

setting is “0”)

● Adjusting the balance

2-1. Select “BALANCE”.

TREB FREQ: 8KHz/12KHz (The factory

default setting is “12K”)

3-1. Push the [P.CH] button upward to

emphasize the sound from the right

speaker, push the button downward to

emphasize the sound from the left speaker.

3-2. Press the [

previous mode.

] button to return to the

∗ The factory default setting is “0”.

● Adjusting the sound restorer

The sound restorer enriches the playback of all

types of music files that have undergone any

level of data compression.

(Adjustment range: L12 to R12)

● Adjusting the fader

2-1. Select “FADER”.

3-1. Push the [P.CH] button upward to

emphasize the sound from the front

speaker, push the button downward to

emphasize the sound from the rear

speaker.

2-1. Select “S RESTORER”.

3-1. Push the [P.CH] button upward or

downward to adjust.

Each time you push the [P.CH] button, the

sound restorer changes in the following

order:

∗ The factory default setting is “0”.

(Adjustment range: R12 to F12)

“OFF” ↔ “1” ↔ “2” ↔ “3”

∗ The factory default setting is “OFF”.

Set this adjustment in accordance with the

music source used

OFF: For music sources compressed at

high bit rate

DXZ675USB

Radio Operations

● Quick tuning

Listening to the radio

Push the [SEEK PANEL] leftward or rightward

and hold in position for 1 second or longer to

tune in a station.

1. Press the [SRC] button and select the radio

mode. The frequency appears in the display.

2. Press the [MENU] button and select the

radio band. Each time the button is pressed,

the radio reception band changes in the

following order:

● Step tuning

Push the [SEEK PANEL] leftward or rightward

to manually tune in a station.

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

Recalling a preset station

3. Push the [SEEK PANEL] leftward or

rightward to tune in the desired station.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pushing the [P.CH] button

upward or downward recalls the stored radio

frequency automatically.

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

1. Press the [MENU] button and select the

desired band (FM or AM).

Seek tuning

1. Press the [MENU] button and select the

2. Push the [P.CH] button upward or downward

to recall the stored station.

desired band (FM or AM).

∗ Press the [

] button to enter the preset

2. Tune into a station.

memory mode. Push the [P.CH] button

upward or downward, then press and hold the

∗ If “MANU” is lit in the display, press and hold

the [MENU] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

[

] button for 2 seconds or longer to

store that station into preset memory.

When the [SEEK PANEL] is pushed rightward,

the station is sought in the direction of higher

frequencies; if the [SEEK PANEL] is pushed

leftward, the station is sought in the direction of

lower frequencies.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press the [

] button to enter the

preset memory mode.

3. Push the [P.CH] button upward or downward

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

to select a desired station, then press and

hold the [

] button for 2 seconds or

longer to store the current station into preset

memory.

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

1. Press the [MENU] button and select the

desired band (FM or AM).

∗ If “MANU” is not lit in the display, press and

hold the [MENU] button for 1 second or

longer. “MANU” is lit in the display and manual

tuning is now available.

2. Tune into a station.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Auto store

Instant station recall (ISR)

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even

operates with the unit in other modes.

● ISR memory

1. Press the [MENU] button and select the

1. Select the station that you wish to store in

ISR memory.

desired band (FM or AM).

2. Press the [OPTION] button.

2. Press and hold the [ISR] button for 2

seconds or longer.

3. Push the [SEEK PANEL] leftward or

rightward to select “AUTO STORE”.

● Recalling a station with ISR

4. Press and hold the [

] button for 2

In any mode, press the [ISR] button to turn on

the radio function and tune the selected radio

station. “ISR” appears in the display. Press the

[ISR] button again to return to the previous

mode.

seconds or longer. The stations with good

reception are stored automatically to the

preset channels.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “PRESET SCN”.

3. Press the [

∗ When a desired station is tuned in, press the

] button again to continue receiving

that station.

] button.

[

DXZ675USB

CD/MP3/WMA/AAC Operations

• Tracks purchased at an iTunes Music store,

and copyright-protected files cannot be

played.

MP3/WMA/AAC

What is MP3?

• When playing AAC files that include image

data, additional time may be required before

playback begins.

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

• Files may not play properly, depending on the

iTunes version under which an AAC file is

encoded.

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-

R disc or CD-RW disc to allow a long listening

time without having to change CDs.

Precautions when creating MP3/

WMA/AAC disc

● Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

2. WMA: Bit rate 32 kbps-192 kbps

3. AAC: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

What is WMA?

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

Notes:

● File extensions

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output (The WMA indicator blinks).

• Windows Media™, and the Windows ® logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

1. Always add a file extension “.MP3” (.mp3),

“.WMA” (.wma) or “.M4A” (.m4a) to MP3,

WMA or AAC file by using single byte letters.

If you add a file extension other than

specified or forget to add the file extension,

the file cannot be played.

● To disable DRM (Digital Rights

Management)

2. Files without MP3/WMA/AAC data will not

play. The indication “– –:– –” appears in the

play time display if you attempt to play files

without MP3/WMA/ACC data.

1. When using Windows Media Player 8, click

on TOOLS ➜ OPTIONS ➜ COPY MUSIC

tab, then under COPY SETTINGS, unclick

the check box for PROTECT CONTENT.

Then, reconstruct files.

● Logical format (File system)

1. When writing MP3/WMA/AAC file on a CD-R

disc or CD-RW disc, please select “ISO9660

level 1, 2 or JOLIET or Romeo or APPLE

ISO” as the writing software format. Normal

play may not be possible if the disc is

recorded on another format.

2. When using Windows Media Player 9, click

on TOOL ➜ OPTIONS ➜ MUSIC RECORD

tab, then under Recording settings, unclick

the Check box for RECORD PROTECTED

MUSIC. Then, reconstruct files.

2. The folder name and file name can be

displayed as the title during MP3/WMA/AAC

play but the title must be within 64 single

byte alphabetical letters and numerals

(including an extension).

Personally constructed WMA files are used

at your own responsibility.

What is AAC?

• AAC is an acronym for “Advanced Audio

Coding” and refers to the audio compression

method used with video compression

standards MPEG-2 and MPEG-4.

3. Do not affix a name to a file inside a folder

having the same name.

● Folder structure

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

• AAC files composed with the following

conditions can be played:

- AAC files encoded with iTunes.

- iTunes Ver. 7.0 or earlier.

- File extension “.m4a” (“.M4A”)

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 510 files can be played.

Backup Eject function

You can eject a disc by pressing the [Q] button

even if the engine key or ACC is at the OFF

position.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

CAUTION

When the disc is ejected, press the [Q] button

to close the control panel. If the control panel

is left open, you will hear a double beep, and

the control panel automatically closes.

3. Some noise may occur depending on the

type of encoder software used while

recording.

1. Press the [Q] button.

Set the type of file to be played

(multi-session function)

When a single disc holds both normal CD type

tracks and MP3/WMA/AAC type tracks, use this

command to select which type of track to play.

The control panel opens.

2. Press the [Q] button.

The disc is ejected.

Note:

• Always close the MOTORIZED FACE after

opening it or ejecting the CD.

∗ Default setting is “CD”.

• When only one type of track (either music CD

or MP3/WMA/AAC) is recorded on a disc,

selecting either type will allow playback of the

disc.

CAUTION

• Be careful not to catch your hand or

fingers while closing the MOTORIZED

FACE.

• When playing CCCD (copy-control CDs), set

to CD type.

• Do not try to put your hand or fingers in

the disc insertion slot. Also never insert

foreign objects into the slot.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “MULTI SESS”.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD

label, or discs with marks where

cellophane tape or rental CD labels were

removed. It may be impossible to extract

these discs from the unit and they may

cause the unit to break down.

3. Push the [P.CH] button upward or downward

to select “CD” or “MP3”. The mixed mode is

switched between CD type or MP3/WMA/

AAC type.

• CD

When playing music CD only.

• MP3

When playing music MP3/WMA/AAC only.

Listening to a disc already loaded

in the unit

4. When setting is completed, remove the disc

and reinsert it.

Press the [SRC] button to select the CD/MP3/

WMA/AAC mode.

Disc-In-play function

When the unit enters the CD/MP3/WMA/AAC

mode, play starts automatically.

As long as the ignition key is turned to the ON or

ACC position, this function allows you to turn the

power to the unit and start playing the disc

automatically when the disc is inserted even if

the power is not turned on.

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

DXZ675USB

CD/MP3/WMA/AAC Operations

Loading a CD

• If MP3/WMA/AAC disc is not input TAG, “NO

TITLE” appears in the display.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

1. Press the [Q] button. The MOTORIZED

FACE opens.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

Notes:

• Only ASCII characters can be displayed in Tags.

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

Selecting a track

● Track-up

1. Push the [SEEK PANEL] rightward to move

ahead to the beginning of the next track.

• Discs not bearing the

CD-ROMs cannot be played by this unit.

mark and

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

2. Each time you push the [SEEK PANEL]

rightward, the track advances ahead to the

beginning of the next track.

Pausing play

1. Press the [

● Track-down

1. Push the [SEEK PANEL] leftward to move

back to the beginning of the current track.

] button to pause play.

“PAUSE” appears in the display.

2. Push the [SEEK PANEL] leftward twice to

move back to the beginning of the previous

track.

2. To resume CD play, press the [

button again.

]

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA/AAC disc and user titles input with this

unit.

Fast-forward/fast-backward

● Fast-forward

1. Push the [SEEK PANEL] rightward and hold

in position for 1 second or longer.

1. Each time you press the [TITLE] button, the

● Fast-backward

title display changes in the following order:

1. Push the [SEEK PANEL] leftward and hold

in position for 1 second or longer.

● CD-TEXT disc

Title scan ➜ User title (disc) ➜ CD-text title

(track) ➜ CD-text title (disc) ➜ Artist name ➜

Title scan ...

∗ For MP3/WMA/AAC discs, it takes some time

until the start of searching and between

tracks. In addition, the playing time may have

a margin of error.

● MP3/WMA/AAC disc

Title scan ➜ Track ➜ Folder ➜ Title TAG ➜

Album TAG ➜ Artist TAG ➜ Title scan ...

Folder Select

This function allows you to select a folder

containing MP3/WMA/AAC files and start

playing from the first track in the folder.

● TITLE SCAN

When the display is changed to the title scan

mode, all titles of the track scroll automatically.

When “AUTO SCROLL” is set “ON”, the title

scan automatically. When “AUTO SCROLL” is

set “OFF”, the title only scan one time. (The

factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

1. Push the [P.CH] button upward or

downward.

Push the [P.CH] button upward to move the

next folder. Push the [P.CH] button

downward to move the previous folder.

∗ Folder without an MP3/WMA/AAC file is not

selectable.

Notes:

2. To select a track, push the [SEEK PANEL]

• If the CD playing is not a CD-text CD or no user

title has been input, “ uNO TITLE” appears in

the display.

leftward or rightward.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

Top function

The top function resets the CD player to the first

track of the disc. Press and hold the [MENU]

button for 1 second or longer to play the first

track (track No. 1) on the disc.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

[

] button to perform folder scan

play.

“FOLDER SCN” appears in the display.

∗ Folder scan play starts from the next folder

after the folder currently being played.

∗ In case of MP3/WMA/AAC, the first track of a

folder being played will be returned.

● Repeat play

This function allows you to play the current track

repeatedly.

List search function

1. Press the [MENU] button to enter the list

search mode. And then the track list appears

in the display.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

3. Push the [P.CH] button upward or downward

2. Push the [P.CH] button upward or downward

to select “ ”, and then press the [

button to perform repeat play.

]

to select a track.

∗ If you push the [SEEK PANEL] leftward or

rightward, the track list scrolls 5 lines at a

time.

∗ “TRACK RPT” appears in the display.

● Folder repeat play

This function allows you to play a track currently

being played in the MP3/WMA/AAC folder

repeatedly.

3. Press the [

] button to play.

∗ In case of MP3/WMA/AAC, this function is

performed in the current folder.

Note:

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

• If no operation is performed for more than 10

seconds, this mode can be cancel and return to

the usual mode.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

[

] button to perform folder repeat

Other various play functions

play. “FOLDER RPT” appears in the display.

1. Press the [OPTION] button.

● Random play

This function allows you to play all tracks

recorded on a disc in a random order.

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

● Scan play

3. Push the [P.CH] button upward or downward

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

to select “ ”, and then press the [

button to perform random play.

]

“TRACK RDM” appears in the display.

2. Push the [SEEK PANEL] leftward or

rightward to select “SCN”.

● Folder random play

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA/AAC

disc in a random order.

3. Push the [P.CH] button upward or downward

to select “ ”, and then press the [

button to perform scan play.

]

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

“TRACK SCN” appears in the display.

∗ Scan play starts from the next track after the

track currently being played.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

● Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

on an MP3/WMA/AAC disc.

[

] button to perform folder random

play. “FOLDER RDM” appears in the display.

● To cancel the trick play

2. Push the [SEEK PANEL] leftward or

rightward to select “SCN”.

rightward to select “TRICK OFF”.

3. Press the [

trick play.

] button to cancel the

DXZ675USB

Operations Common to Each Mode

● Setting the contrast

You can adjust the display contrast to match the

To change adjustment setting

angle of installation of the unit.

∗ The factory default setting is “8”. (Adjustment

level: 1 to 16)

1. Press and hold the [OPTION] button for 1

second or longer to switch to the

adjustment selection display.

2-1. Select “CONTRAST”.

2. Push the [SEEK PANEL] leftward or

3-1. Push the [P.CH] button upward or

rightward to select the “item name”.

downward to adjust the contrast.

“CLOCK EDIT” ↔ “CONTRAST” ↔

“SCREEN SAVER” ↔ “MSG INPUT” ↔

“AUTO SCROLL” ↔ “SCROLL SPEED”’

↔ “DIMMER” ↔ “BLINK LED” ↔ “AMP

CANCEL” ↔ “TEL-SPEAKER” ↔ “TEL-

SWITCH” ↔ “SYSTEM CHECK”

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

3. Push the [P.CH] button upward or

downward to select the “desired setting

value”.

∗ In the case of display appearing “ENT”, the

[

] button must be pressed to display

the setting value.

∗ After completing settings, press the

[OPTION] button to return to the previous

mode.

∗ The factory default setting is “Pattern

RANDOM”.

2-1. Select “SCREEN SAVER”.

● Setting the clock

3-1. Press the [

] button.

2-1. Select “CLOCK EDIT”.

3-2. Push the [P.CH] button upward or

3-1. Press the [

] button

downward to select the setting.

3-2. Push the [SEEK PANEL] leftward or

“Pattern RANDOM” ↔ “Pattern

MESSAGE” ↔ “Pattern SS” ↔ “Pattern

OFF”

rightward to select the hour or the minute.

3-3. Push the [P.CH] button upward or

downward to set the correct time.

∗ The clock is displayed in 12-hour format.

3-3. Press the [

previous mode.

] button to return to the

3-4. Press the [

time into memory.

Note:

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the

car’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

] button to store the

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “Welcome to

Clarion”.

2-1. Select “MSG INPUT”.

3-1. Press the [

] button.

3-2. Press and hold the [MENU] button for 1

second or longer to clear the old message.

3-3. Push the [SEEK PANEL] leftward or

rightward to move the cursor.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

3-4 Press the [MENU] button to select a

character type. Each time you press the

[MENU] button, the character type changes

in the following order:

● Anti-theft indicator

The red Anti-theft indicator is a function for

preventing theft. When the DCP is removed

from the unit, this indicator blinks.

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters…

∗ The factory default setting is “OFF”.

2-1. Select “BLINK LED”.

3-5. Push the [P.CH] button upward or

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

downward to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “AMP CANCEL”.

3-7. Press and hold the [

] button for 2

seconds or longer to store the message in

memory and cancel the input message

mode.

∗ Press and hold the [MENU] button for 1

second or longer to cancel the input

message. Then press and hold the

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

[

] button for 2 seconds or longer to

store the message and the message return

to the default setting.

● Setting the car speaker output for the

cellular phone

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “AUTO SCROLL”.

When the AUX input cable is used to connect a

AUX BLUETOOTH BB (BLT370) (sold

separately)

∗ The factory default setting is “R”.

∗ To output the telephone calls, set the cellular

phone interrupt to ON.

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

2-1. Select “TEL-SPEAKER”.

• ON:

3-1. Push the [P.CH] button upward or

downward to select “R” or “L”.

To scroll automatically.

• OFF:

To scroll just 1 time.

• R:

Telephone calls can be heard on the front

right speaker connected to this unit.

● Setting the speed of the title scroll

This function allows you to adjust the speed of

the title scroll.

∗ The factory default setting is “3”.

2-1. Select “SCROLL SPEED”.

• L:

Telephone calls can be heard on the front

left speaker connected to this unit.

3-1. Push the [P.CH] button upward or

downward to select from “1” to “6”.

● Setting the dimmer control

You can set the dimmer control “HIGH”, “MID”,

“LOW” or “OFF”.

∗ The factory default setting is “MID”.

2-1. Select “DIMMER”.

3-1. Push the [P.CH] button upward or

downward to select “HIGH”, “MID”, “LOW”

or “OFF”.

DXZ675USB

Operations Common to Each Mode

● Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

AUX function

This system has an external input cable so you

can listen to sounds and music from external

devices connected to this unit.

When the AUX input cable is used to connect a

AUX BLUETOOTH BB (BLT370) (sold

separately).

∗ The factory default setting is “OFF”.

2-1. Select “TEL-SWITCH”.

● Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

3-1. Push the [P.CH] button upward or

downward to select the setting in the

following order:

∗ The factory default setting is “MID”.

1. Press the [OPTION] button, “AUX SENSE

MID” appears in the display.

“OFF” ↔ “ON” ↔ “MUTE”

2. Push the [P.CH] button upward or downward

to select “LOW”, “MID” or “HIGH”.

• OFF:

This unit continues normal operation even

when the cellular phone is used.

Entering titles

• ON:

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be

entered for each mode are as follows.

You can listen to your telephone calls from

the speakers connected to this unit.

∗ When listening to your calls on your car

speakers, you can adjust the volume by

pushing the [P.CH] button upward or

downward.

Mode

Number of titles

30 titles

Radio mode

CD mode

TV mode

50 titles

• MUTE:

The sound from this unit is muted during

telephone calls.

20 titles

CD changer mode

Number of titles

Note:

DCZ625 connected

100 titles

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

1. Press the [SRC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

● Performing a system check

2-1. Select “SYSTEM CHECK”.

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

3-1. Press and hold the [

second or longer.

] button for 1

“SYSTEM CHECK” appears in the display,

then the unit returns to the previous

operation mode.

3. Press the [OPTION] button.

4. Push the [SEEK PANEL] leftward or

rightward to select “TITLE INPUT”.

5. Press the [

] button.

The display switches to the title input display.

6. Push the [SEEK PANEL] leftward or

rightward to move the cursor.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

7. Press the [MENU] button to select a

character. Each time you press the [MENU]

button, the character changes in the

following order:

Clearing titles

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters…

2. Press the [OPTION] button.

3. Push the [SEEK PANEL] leftward or

rightward to select “TITLE INPUT”.

8. Push the [P.CH] button upward or downward

to select the desired character.

4. Press the [

] button.

9. Repeat steps 6 to 8 to enter up to 10

characters for the title.

The display switches to the title input display.

5. Press and hold the [MENU] button for 1

10.Press and hold the [

] button for 2

second or longer.

seconds or longer to store the title into

memory.

All characters in the title disappear.

6. Press and hold the [

] button for 2

seconds or longer to store the setting.

DXZ675USB

7. OPERATIONS OF ACCESSORIES

USB Operations

• To prevent the accidental loss of data, always

back up important data on your computer.

USB memory device operation

Note:

• This unit does not support connections to a

computer. In addition, connections made

through a USB hub device are also not

supported.

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Top function

∗Scan play

∗Repeat play

∗Random play

• When a USB memory device is composed of

two or more drives, only one of the drives will

be detected.

• USB memory devices with security functions

cannot be played.

• Do not connect an iPod to the USB

connector, since playback and controls may

not function properly. To connect an iPod,

use the CeNET iPod interface. For details,

see the section “iPod BB Operations” (page

26).

∗Folder selection

∗List search function

See “CD/MP3/WMA/AAC Operations” (page 16-

19) for details.

About USB memory

• USB is an acronym for Universal Serial Bus,

and refers to an external bus standard

supporting data transfer rates of 12 Mbps.

• The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

• This unit is compatible with USB 1.1/2.0 with

maximum data transfer rates of 12 Mbps.

CAUTION

• USB memory devices that can be played by

connecting to the unit’s USB cable are limited

to those recognized as “USB mass storage

class devices”; operation is not guaranteed

with all USB memory devices.

• Insert and remove a USB memory device

only when the device is not being

accessed. Connecting or disconnecting

the device at the following times may

result in the loss of data:

∗ Devices compatible with “USB Mass Storage

Class” can be used merely by connecting to

the host device, without need for special

drivers or application software.

- If the USB memory device is removed or

power is disconnected during writing to

the device.

• Consult the manufacturer of your USB

memory device for information regarding

whether it is supported by “USB Mass

Storage Class” standards.

- When the device is subjected to static

electricity or electric noise.

• Do not leave a USB memory device

unattended in an automobile. Exposure to

direct sunlight or high temperatures may

cause deformation or other malfunction of

the USB memory device.

• Audio files playable on this unit are limited to

MP3/WMA/AAC files. For details, see the

section “MP3/WMA/AAC” (page 16).

Copy-protected WMA/AAC files cannot be

played on this unit.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

USB Operations

Connecting a USB memory device

To stop play

1. Connect the USB memory device to the USB

1. Press the [SRC] button and switch the

function to a source other than the USB

memory.

cable.

Playback will begin from the first file

recorded on the USB memory device.

∗ If the USB memory device is not recognized,

press the [SRC] button to switch the source to

the device.

∗ Always insert the USB memory device fully

into the connector. Incomplete connections

may cause the USB memory device not to be

recognized.

∗ Depending on the number of tracks recorded,

some amount of time may be required until all

tracks are read into the unit.

CAUTION

Do not remove the USB memory device

when the USB mode is selected, since it may

result in loss or damage to data on the USB

memory device.

Always backup and save important data on

your computer.

2. Remove the USB memory device from the

USB cable.

∗ The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

To listen to tracks on a connected

USB memory device

1. Press the [SRC] button to switch the source.

When USB memory device is selected,

playback will begin from the location at which

playback was previously stopped.

∗ When a USB memory device is connected the

USB mode will be displayed.

∗ When a USB memory device is disconnected

and then reconnected, playback will begin

from the beginning of the USB memory

device.

DXZ675USB

iPod BB Operations

● iPod BB

Other various play functions

(in Play mode)

This section describes operations when

connected to a CeNET iPod Interface (EA-

1276B). (Hereinafter, “iPod Interface (EA-

1276B)” is abbreviated as iPod BB.)

Notes:

• These functions are not supported when in the

iPod menu mode.

• The Random function set on the iPod or when

connected to iPod BB, remains the same after

attachment/ detachment of the iPod.

Note:

• See the iPod BB Owner’s Manual for details

regarding iPod BB connections and operation

conditions.

• The iPod BB can be set simultaneously for All

repeat and All random.

Connecting an iPod

1. Press the [OPTION] button.

When an iPod is connected to the iPod BB

interface, the “Repeat” set on the iPod will

become “All repeat play” instead. Likewise,

“Shuffle” set on the iPod will become as follows:

● Repeat play

Play back one track repeatedly.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

• “Shuffle (Albums)” play ➜ Random play

• “Shuffle (Songs)” play ➜ All random play

3. Push the [P.CH] button upward or downward

to select “ ”, and then press the [

button to perform repeat play.

]

The iPod BB interface has two modes, the “Play

mode” and the “iPod menu mode” for selecting

tracks. Switch between these modes by

pressing the [MENU] button.

● All repeat play

Repeatedly play all tracks within a selected

category.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

Select iPod BB Interface

1. Press the [SRC] button.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

Playback will begin from the last file that was

played on the iPod alone or through the iPod

BB.

[

] button to perform all repeat play.

● Random play

Note:

Play all albums within a selected category, in

random order. (Corresponds to “Shuffle

(Albums)” command on iPod.)

• The following operations in Play mode operate

the same as in CD mode:

∗Track selection: [SEEK PANEL]

∗Fast-forward/fast-backward: [SEEK PANEL]

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

∗Pause: [

]

3. Push the [P.CH] button upward or downward

See “CD/MP3/WMA/AAC Operations” (page 16-

19) for details.

to select “ ”, and then press the [

button to perform random play.

]

● All random play

Play all tracks within a selected category, in

random order. (Corresponds to “Shuffle

(Songs)” command on iPod.)

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

[

] button to perform all random

play.

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

iPod BB Operations

● To cancel the trick play

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT OFF” or “RDM

OFF”.

About title display

This unit supports the display of title information

transmitted from a connected iPod.

• Character code information is UTF-8;

displayable characters include English

alphanumerics, some symbols, and some

umlaut characters.

3. Press the [

] button.

Note:

• When the all repeat play mode is canceled,

playback will stop when all tracks have been

played.

• Unsupported characters will be replaced by

asterisks (*).

Selecting category from the iPod

1. Press the [MENU] button.

The iPod menu categories will be displayed.

2. Push the [P.CH] button upward or downward

to switch between categories.

The iPod menu categories alternate in the

following order:

“Composers” ↔ “Playlist” ↔ “Artists” ↔

“Albums” ↔ “Songs” ↔ “Genres” ↔

“Composers” ...

Note:

The iPod menu mode can be canceled by

performing the following operation:

• Press the [MENU] button.

3. Push the [SEEK PANEL] rightward to select

the category.

4. When the track name display is showing,

push the [SEEK PANEL] rightward.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

∗ Subfolders may be displayed, depending on

the category.

In this case, push the [P.CH] button upward or

downward to switch between subfolders, then

push the [SEEK PANEL] rightward to select

the desired subfolder.

∗ When the track name display is showing,

pushing the [SEEK PANEL] leftward will

return the display to the currently playing

folder name display.

5. Push the [P.CH] button upward or downward

to select a track within a category.

6. Push the [SEEK PANEL] rightward to play

the desired track.

DXZ675USB

Satellite Radio Operations

This function is available when a Satellite Radio

Receiver is connected through the CeNET

cable.

Confirming your SIRIUS ID

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “SID DISP”.

This unit can control the following satellite radio

receivers:

3. Press the [

] button.

• XM Satellite Radio Receiver: XMD1000

• XM Smart Digital Adapter: XM SDA

Your SIRIUS ID will be displayed 12 digits

number.

• SIRIUS Satellite Radio Receiver: SIRCL2,

SIRCL3

Note:

4. To return to the previous mode, press the

[OPTION] button.

• When the function is differ depending to the

connected receiver, they are distinguished by the

following notations:

“XM”: for an XM Satellite Radio Receiver

“SIRIUS”: for a SIRIUS Satellite Radio Receiver

Displaying channel labels

1. Press the [TITLE] button to select the

desired channel label.

Channel ➜ Category ➜ Title ➜ Artist ➜

Radio text ➜ Channel...

Selecting a Satellite Radio mode

1. Press the [SRC] button.

Channel selection

1. Channels are selected with the [SEEK

The system changes to the specified

Satellite Radio mode.

PANEL].

∗ For details, see the following operation

descriptions.

Selecting a band

Note:

1. Press the [MENU] button to select a band.

This changes the reception band as follows:

•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...

• The audio output is muted and other button

operations are not accepted during channel

selection.

● Information displayed during reception

The following information is displayed when the

satellite radio cannot be received normally.

Tuning mode

There are two channel selection modes: quick

tuning mode and step tuning mode.

• When the receiver is turned on the first time

or after a reset: “UPDATING”

● Quick tuning

1. Push the [SEEK PANEL] leftward or

rightward and hold in position for 1 second or

longer.

• When a channel is being tuned in (no signal is

yet received):

XM: “LOADING”, SIRIUS: “ACQUIRING”

● Step tuning

1. Push the [SEEK PANEL] leftward or

rightward.

• A channel without a broadcast has been

selected:

XM: “– – – CH”, SIRIUS: “INVALID CH”

• A channel not covered by your contract:

XM: “UPDATING”, SIRIUS: “CALL 888” ↔

“539-SIRI” (alternated)

• When your contract is expired: “SUB

UPDATE”

^DXZ675USD^Bownload from Www.Somanuals.com. All Manuals Search And Download.

Satellite Radio Operations

Recalling a preset station

Scan function

A total of 18 satellite radio stations can be

There are two scan modes: the category scan

stored.

mode and the preset scan mode.

• XM: 6-XM1, 6-XM2 and 6-XM3

During scanning channels are displayed in

abbreviated form, the display mode cannot be

switched.

• SIRIUS: 6-SR1, 6-SR2 and 6-SR3

This allows you to store your favorite satellite

radio stations in memory for later recall.

● Category scan (CATEGORY SCN)

In a category scan, broadcast channels in the

same category as the current channel are

selected about every 10 seconds.

1. Press the [MENU] button to select the

desired band.

2. Push the [P.CH] button upward or downward

1. Press the [OPTION] button.

to select the desired preset station.

2. Push the [SEEK PANEL] leftward or

rightward to select “CATEGORY SCN”.

Preset memory

1. Press the [MENU] button to select the

3. Press the [

] button.

Note:

desired band.

• Category scanning is not available when no

category is defined for the current channel.

2. Select the desired channel with quick tuning

or step tuning.

● Preset scan (PRESET SCN)

A preset scan scans the channels (up to 18

channels) stored in the preset memory about

every 10 seconds.

3. Press the [

] button to enter the

P.CH memory screen.

4. Push the [P.CH] button upward or downward

to select the desired preset channel.

1. Press the [OPTION] button.

5. Press and hold the [

] button for 2

2. Push the [SEEK PANEL] leftward or

rightward to select “PRESET SCN”.

seconds or longer to store the current

channel into preset memory.

3. Press the [

] button.

Receiving stations selected by